Views: 63 Author: Site Editor Publish Time: 2020-08-31 Origin: Site
The lamp is a lighting source that people need in their daily life. There are many types of lamps, such as chandeliers, wall lamps, etc. How to remove the chandeliers?
This article contains the following:
Ceiling lamp
Hanging chandelier
Precautions for chandelier disassembly
Precautions for use
The disassembly of the ceiling-mounted ceiling is relatively simple, such as a round ceiling lamp, use a screwdriver to remove the three screws around the lampshade iron ring, and then rotate the lampshade until it is unscrewed. The ceiling light has three small buttons beside the lamp holder. Open the small buttons and the lamp cover will fall off. The old-fashioned ceiling lamp has three screws next to the lamp holder. To unscrew the screw, the lampshade can be removed, and finally the lamp can be removed.
Rectangular chandelier, recessed chandelier, etc. need to start from one corner with a suction cup, slowly pull down the lampshade, and then repeat the processing of the second corner until the lampshade is removed.
For hanging pendant lamps, the weight is heavier and the volume is relatively large. When disassembling, you need to remove the auxiliary parts and the bulb first, then remove the suspension rod and other objects, and finally remove the chassis of the pendant lamp Unscrew the small screw and cut the wire.
(1). Turn off the power
Before disassembling the pendant lamp, be sure to turn off the power and wait for about half an hour before dismantling the pendant lamp to avoid leakage or electric shock accidents.
(2). Take good protective measures
1.1. During the disassembly of the chandelier, it is necessary to do safety protection work, such as wearing protective glasses, protective clothing, helmets, etc., because the installation position of the chandelier is generally relatively high and has a certain weight. If it is accidentally dropped, It is easy to have a safety accident.
1.2. When disassembling, it is also necessary to avoid damaging the wiring to other electrical appliances. For example, when removing the kitchen chandelier, the kitchen flue, internal wires, water pipes and other objects must not be damaged, nor should the load-bearing structure of the ceiling be damaged.
1.3. Save the removed objects
After removing all parts of the chandelier, if the chandelier has no use value at all, then it can be disposed of properly and discarded, but if there is use value, then the removed items must be preserved, so that some decoration can be relatively reduced cost.
Dust removal of crystal beads: If conditions permit, low-grade crystal beads were used in the past, consider changing to high-quality high-quality crystal beads; the high-quality high-quality crystal beads have a dust-proofing process on the surface, which is not easy to get dust and the effect is better.
Refurbishment of the lamp holder: The lamp holder with genuine electroplating of 24K gold can generally be kept in color for five or more years; consider re-turning the power once after five years, that is, have a new feeling.
Regular inspection: The safety and stability of lamps hanging in important positions or in places where people come and go frequently should be the first priority. Headlights often weigh hundreds of kilograms, and in case of a fall, the consequences are unimaginable. Therefore, people should be regularly dispatched to check the embedded parts and load-bearing hooks and chains hidden in the ceiling to prevent aging without being noticed and causing accidents.
Timely update: if possible, you should also check whether the performance of the built-in wire is intact, and if it is found to be sticky or aging, replace it immediately to ensure safety.
Professional maintenance: large-scale lamps and lanterns with complicated wiring (with hierarchical lighting), it is best to hire professional technicians from lighting companies to clean and maintain them.
If you want to buy chandeliers, Pendant Light, Ceiling Light please contact KAMABLE.
