How to clean project light?

    Project lights usually create a dreamy and beautiful atmosphere with a highly designed appearance and gorgeous lighting to meet people's needs. But for many people, cleaning project lights is not a good task. 

    Project lights are usually not only composed of a bulb and a lampshade, but are composed of some bulbs and a lampshade. Some project lights also have decorative parts. The complicated design makes it difficult to clean the project lights. In order to allow you to make full use of them during the life of the project lights and reduce your difficulty in cleaning the lights, this article provides you with several suggestions and precautions for cleaning the project lights.

1. How to easily and safely remove dust from project lights

2. How to clean the lampshade of different materials of the project light

3. How to effectively clean the bulbs of project light

4. Noteworthy tips

 

1. Easily remove dust from project lights

    There is no doubt that there is a lot of dust hidden in the lampshade of the project lamp that we usually do not notice. You only need a retractable dust collector to easily remove the dust on the lampshade. When you clean the project lighting, you do not need to use a ladder to touch the project light. You only need to lift the dust collector on the ground, it will automatically suck the dust in the lampshade without sweeping the dust to the ground. If you don't have a retractable dust collector, don't worry, you can use a rubber band to tie a dry cloth to a stick or clothes rail instead of the dust collector. Just use this method to get out the dust of the project light, it will get the dust of the project light to the ground, and you need to clean the ground.

2. How to clean the lampshade of different materials of the project light

    If the lampshade of your project lamp is made of strong fabric, you can not wipe them directly with a wet cloth, because it will leave water stains that will not dry out. You need a hair gluer to remove the dust on the lampshade.

    If the lampshade of your project lamp is glass, the most effective cleaning method is to remove the glass lampshade and clean them. But it is worth noting that it is best not to wash the glass lampshade directly with water. You should first soak the glass lampshade in warm soapy water for a few minutes, then rinse off the soapy water with clean water, and finally dry the glass lampshade completely with a dry towel.

 

3. How to effectively clean the bulbs of project light

    Light bulbs are one of the most important parts of project light, dirty light bulbs will emit less light. For the bulb to work properly, you need to clean the bulb regularly. You need to remove the bulb, but you cannot clean the bulb directly with water, which may affect the life of the bulb. You just need to wipe off the back of the bulb with a soft cloth.

TIPS:

1. I believe many people know that when the project light is on, the light cannot be cleaned. Because contact with hot bulbs is dangerous. We recommend that you turn off the project light and wait at least one hour before cleaning the project light to allow the bulb to cool down sufficiently.

2. When drying the glass lampshade, don't forget to wipe the inside of the glass lampshade.

 

3. If you can't remove the parts of the project light, you can't spray water or cleaning liquid on the project light and then dry it with a clean cloth. You should wipe the dirty area of the project lamp with a damp cloth.

 

    I hope this article can help you clean your project lighting effectively and safely. KAMABL is a professional lighting manufacturer, if you need project light,Crystal chandelier,Brass chandelier  please contact us.