How to clean the crystal light
Publish Time: 2019-11-11 Origin: Site
If we could start over, I will choose the following steps to clean the crystal light to keep the secret of the crystal light.
1. Set up simple, safe and downgradable workbench, The platform height is based on the highest height of the lamp body which can be reached by the person standing on it. Remove the crystals one by one, the posture should be correct, pay attention to the fasteners, gently and slowly, break a crystal, the lamp will reveal the secret.
2. Dip the unloaded crystal into the container filled with kerosene. Brush the crystal with a toothbrush. Wait for the dust on the surface to slowly soften, then wash the crystal with washing powder.
To avoid fingermarks on crystal lamps, wear white cotton gloves when cleaning crystal lights.
3. Cut off the power and wipe the lamp holder. Remove the bulb and wipe it clean before installing it. When the bulb is screw in, it should be moderate. Too loose will cause bad contact and too tight may screw the bulb.
If LED crystal light, remove the crystal, wipe the bottom board with a dry cloth.