How to install a crystal lamp
Publish Time: 2019-09-23 Origin: Site
Crystal lamp, most family or hotel project preferred, Brilliant, luxurious, gorgeous, retro atmosphere. But the installation of crystal lamp looks very tedious, all kinds of parts like light bulbs, beads etc. Here is to teach everybody seven steps to install crystal light easily.
1, Test the fittings. Normal crystal chandelier have ceiling plate, back panel, gasket, light bulbs, electric wire, lamp holder, back bar, expansion screws, screws, etc., and the tools used are available: electric drill, 6 mm bit, tape, screwdriver, pliers, hammer, etc.
2, Test the bulb if it's all good. First, take out the bulbs and twist them to the lamp panel carefully, and then turn on the light to test, and ensure the normal use of lamps.
3, Take the back panel off the ceiling plate, and select the appropriate position for the hole in the gasket. If you can't find the empty space, pay attention to adjusting the position of the screw.
4, Use a ruler to locate the screw in the ceiling, and use a pen to mark the position of the hole, then take out a drill with 6 mm bit to drill in the ceiling logo position.
5, Hammer the expansion screws into the hole in the ceiling, then anchor the back plate to the ceiling with a screwdriver to fix the screw.
6, Connect the wiring and fix the lamp holders, then turn off the power, connect the power source wire head to the lamp wire, wrap the tape, and then fix the lamp holders to the back bar for next step.
7, Decorative accessories installation. Take out all the parts inside of the box, assemble according to drawings and installation instructions. Hang accessories, according to the design of crystal chandeliers, there are different parts, some have only the light bulbs, and some have the crystal balls,article crystal, beads chains and other accessories. After hanging, check if there is any leakage, and test whether the lamp can be operated normally, at last, the installation step of the crystal lamp is complete!
Remember, it's important to use lights safely, and if you don't know how to install it, you must look for a professional when installing a crystal lamp!