Lighting Installation Precautions

1. When installing all kinds of lamps on the flat ceiling, they should be installed according to the requirements of the installation instructions. The darklines in the ceiling or wall panel must be protected by flame retardant bushing.

2. The most basic requirements for the installation of lamps must be firm, safe, no potential dangers.

3. Bathroom and kitchen installed low foot lamp head, direct use of porcelain screw low foot lamp head, screw lamp head wiring, phase line (switch line) should be connected to the center contact terminal, the zero line is connected to the thread terminal.

4. Wiring problem

(1) Indoor installation of bedside lamps, desk lamps, mirror headlights, floor lamps, wall lamps and other lamps, the height of less than 2.4 meters and below, the metal shell of the lamp must be grounded reliably, can ensure the safety of use.

(2) When leakage occurs, users can be guaranteed not to be hurt. In addition, when wiring, the position of the light box should be added with a ground wire, which is also for safety considerations.

5. Weight analysis of lamps

(1) When the weight of the lamp is greater than 3kg, the embedded hook should be used, or the expansion bolt should be fixed directly from the roof, and the flat top keel bracket cannot be used to install the lamp.

(2) The lead wire from the lamp head box should be protected to the lamp position with a hose to prevent the lead from being exposed in the flat top.