Hotel engineering lighting custom selection points and skills

For hotels, the selection of hotel lamps is different from the needs and lighting of other use occasions. From the characteristics and needs of the hotel, there are several main considerations. This is the key point we need to pay attention to when designing hotel lighting:

1, time durability Durability General star hotel, about a small renovation in about five years, about a decade of a large renovation. In other words, the life of the luminaire 

must be at least ten years or more to meet the requirements of a star hotel. Because the general small maintenance does not replace the lamps, the range of human resources 

involved is too large. This means that in the selection of the luminaire, the most heated and stressed parts of the luminaire, including the reflector cup, the heat sink and the 

fixing (positioning) components, the quality is very important.

2. Flexibility The light source used in general star hotels has a life expectancy of about 2,000 to 4,000 hours. Therefore, the lamp will require a lot of light sources to be 

replaced in 10 years. The number of star-rated hotel lamps is over 10,000, so the replacement of the light source is also involving a huge amount of human resources, so the 

flexibility of the lamp is another consideration. The most ideal type of luminaire is the ability to load and unload the light source without the need for a fixed (positioning) 

component that pulls the luminaire. In addition to saving replacement time, it also provides positive protection for interior decoration.

3. Detailing This includes all aspects of the fixture itself. Take the general ceiling light as an example, its spray quality (such as metal, the quality of the surface layer), 

the smoothness of the reflector (such as frosted reflector, uniformity of sandblasting), when After the ceiling is installed in the ceiling, we need to pay attention to the 

details such as the tightness of the ceiling (gypsum board/wood finish) (whether there is light leakage). Another point, you need to mention, in addition to the hardware 

(lamps), the installation workers (process) is also very important, the decoration should be well ensured that the lamps are installed in the correct installation method.

4. Projection index The Cutoff Angle of the luminaire, the influence of glare, how to collect the light source, the elasticity of the projection of the luminaire, and the 

expandability of the accessories all affect the selection of the luminaire. Especially in terms of the expandability of accessories, it is very careful to consider the 

"projection angle", "color/tone correction", "glare prevention", "accurate projection/illumination", etc. Some of these accessories are used to create an overall atmosphere.